日本語
Ibaraki University's
Graduate School of Science and Engineering (Engineering)
Department of Mechanical Engineering

顔写真
Professor

ITOH Goroh

  • Birth:1956

Other affiliation / position

  1. Graduate School of Science and Engineering (Engineering) Department of Mechanical Engineering

Career

  1. Research Associate, The University of Tokyo, Faculty of Engineering, Department of Materials Science 1982/10-1996/05
  2. Associate Professor, Nagaoka University of Technology, Faculty of Engineering, Department of Mechanical Eng. 1996/06-2000/03
  3. Associate Professor, Ibaraki University, College of Engineering, Department of Mechanical Engineering 2000/04-2002/03
  4. Professor, Ibaraki University, College of Engineering, Department of Mechanical Engineering 2002/04-Present

Academic background

  1. The University of Tokyo Faculty of Engineering 金属材料学科 1978
  2. The University of Tokyo Graduate School, Division of Engineering 金属材料学 Master course 1980
  3. The University of Tokyo Division of Engineering Department of Metallurgy and Materials Science Doctor course 1982 Withdrawn before completion

Academic degrees

  1. Doctor of Engineering The University of Tokyo 1983/11

Current state of research and teaching activities

金属材料の塑性加工に関する研究、金属材料中の水素に関する研究

Research Areas

  1. Physical Metallurgy
  2. Structural and Functional Materials
  3. Metallurgy and Material Processing

Research keywords

  1. 金属材料、塑性加工、金属組織、熱処理、水素、水素の可視化

Subject of research

  1. Study on the plasticity of metallic materials 2000-2008
  2. Study on the behavior of hydrogen in metallic materials 2003-2006

Proposed theme of joint or funded research

  1. Study on the plasticity of metalic materials Wish to undertake joint research with industry and other organizations including private sector. Joint research

Bibliography

  1. アルミ二ウム中の水素量の分析技術 伊藤吾朗 一般社団法人軽金属学会　研究部会報告書No60 2015/03 978-4-905829-82-9 昇温脱離法による水素量測定に及ぼす前処理方法の影響に関する基礎的検討
  2. 接着耐久性の向上と評価　劣化対策・長寿命化・信頼性向上のための技術ノウハウ 島田康裕，多田俊介，伊藤吾朗 株式会社　情報機構 2012/09/21 自動車用合金とゴムの接着における耐久性の向上と評価
  3. 摩擦攪拌プロセスによる接合と表面改質　 伊藤勉,本橋嘉信,伊藤吾朗,平野　聡 一般社団法人軽金属学会　研究部会報告書No58 2012/09/14 978-4-905829-71-3 7075アルミニウム合金の摩擦攪拌接合継手の室温引張特性
  4. 摩擦攪拌プロセスによる接合と表面改質 伊藤勉,雲　暁勇,アレクサンドレ　ゴロボロドコ,本橋嘉信,伊藤吾朗,平野　聡,稲垣　正壽 一般社団法人軽金属学会　　研究部会報告書No58 2012/09/14 978-4-905829-71-3 7075アルミニウム合金の摩擦攪拌接合継手のビッカース硬さに寄与する金属学的諸因子
  5. 水素製造・吸蔵・貯蔵材料と安全化 第32著者(執筆順)他48名 サイエンス＆テクノロジー株式会社 2010/08/30 978-4-86428-044-4

Papers

  1. Influence of Microstructures of Tungsten Electrodes on Weldability of Copper Materials Akira Kurumada J. Jpn. Inst. Copper 57/ 1, 291-294 2018/08/01
  2. Research paper (scientific journal) Joint Strength evaluation on the interface of precipitates with segregated hydrogen in Al-Zn-Mg alloys by ab initio calculation Takatoshi NAGANO, Yuta KAWASAKI, Yasushi SASAJIMA and Goroh ITOH J. JILM 68/ 4, 189-193 2018/04/30 0451-5994
  3. Research paper (scientific journal) Tensile Properties of an Electrolytically Hydrogen Charged Duplex Stainless Steel Affected by Strain Rate Afshin YOUSEFI and Goroh ITOH ISIJ International 58/ 3, 561-565 2018/03/31 1347-5460 10.2355/isijinternational.ISIJINT-2017-631
  4. Research paper (international conference proceedings) Joint Muon Spin Relaxation of an Al-3.4%Zn-1.9%Mg Katsuhiro Nishimura,Kenji Matuda,Norio Nunomura,Takahiro Namiki,Seungwon Lee,Daichi Hatakeyama,Wataru Higemoto,Yasuhiro Miyake,Teiichiro Matsuzaki,Goroh Itoh,kentaro Ihara,Hiroyuki Toda,and Masatake Yamaguchi JPSCP Conf. Proc. 21, 011030-1-011030-5 2018/03/02
  5. Research paper (international conference proceedings) Joint Hydrogen behavior in a plasma-charged dual phase stainless steel Afshin YOUSEFI,Goroh ITOH,Toshiaki MANAKA,Masaya AOKI Materials Performance in Hydrogen Environments The American Society of Mechanical Engineers 159-166 2017

Research presentations

  1. Oral presentation(general) Al-Mg-Si系合金管材の内表面品質と組織に及ぼすスピニング加工条件の影響／ 塑性加工春季講演会 2018/05/31
  2. Oral presentation(general) The comparison between electrolytically and plasma hydrogen charging method of duplex stainless steel The 13th International Student Conference in Ibaraki (ISCIXⅢ) 2017/11/18
  3. Poster presentation Effect of internal hydrogen on fatigue properties in an Al-Mg alloy The 13th International Student Conference in Ibaraki (ISCIXⅢ) 2017/11/18
  4. Poster presentation Visualization of Hydrogen in a Duplex Stainless Steel The 13th International Student Conference in Ibaraki (ISCIXⅢ) 2017/11/18
  5. Oral presentation(general) 抵抗溶接用タングステン電極における割れ発生機構ー微細組織の影響ー 第68回塑性加工連合講演会 2017/11/09

Prizes

  1. Doctor's　Professor of the year 2013/07/17
  2. Master's　Professor of the year 2013/07/17
  3. Master's　Professor of the year 3年連続賞 2013/07/17
  4. Doctor's　Professor of the year 3年連続賞 2013/07/17
  5. 一般社団法人日本機械学会関東支部貢献賞 2012/03/09

Alloted class

  1. Bachelor course research

Memberships of academic societies

  1. 一般社団法人軽金属学会 1977/10/01-Present
  2. 一般社団法人日本塑性加工学会 2000/04/01-Present
  3. 超塑性研究会 2000/04/01-Present
  4. 一般社団法人日本鉄鋼協会 2011/04/01-Present
  5. 一般社団法人日本機械学会 2003/04/01-Present

Committee Career

  1. 一般社団法人軽金属学会 代表理事、会長 2017/05/20-2019/05/19
  2. 超塑性研究会 副会長 2016/04/01-2018/03/31
  3. International Conference on Superplasticity in Advanced Materials, International Advisory Committee Chairman 2015/09/12-2021/09/11
  4. 一般社団法人軽金属学会 代表理事、副会長 2011/05/20-2013/05/19